My Blog

Posts for tag: crowns

By Michael E. Huguet DDS
October 21, 2021
Category: Dental Procedures
Tags: crowns   celebrity smiles  
HowCelineDionOvercameHerSmileObstacle

For over three decades, Celine Dion has amazed audiences and fans with her powerful singing voice. Best known for her recording of "My Heart Will Go On," the theme song for the movie Titanic, Dion has amassed global record sales topping 200 million. In her early singing days, though, she struggled with one particular career obstacle: an unattractive smile.

The Canadian-born performer had a number of dental defects including crooked and discolored teeth, and—most prominent of all—abnormally large cuspid or "canine" teeth (located on either side of the four front incisors). They were so noticeable that one Quebec celebrity magazine gave her the unflattering nickname "Canine Dion."

This isn't an unusual problem. Since human canines are already the longest teeth in the mouth, it doesn't take much for them to stand out. Our ancient hunter-gatherer ancestors needed these large, pointed teeth to survive. But with the evolution of agriculture and industry, canine teeth have become gradually smaller—so much so that when they're abnormally large, they don't look right in a smile.

So, what can be done if your canines embarrassingly stand out from the rest? Here are some of the options to consider.

Reduce their size. If your canines are just a tad too long, it may be possible to remove some of the enamel layer in a procedure called contouring. Using this technique, we can reduce a tooth's overall size, which we then re-shape by bonding composite resin to the tooth. It's only a good option, though, if your canines have an ample and healthy layer of enamel.

Repair other teeth. The problem of prominent canine teeth may actually be caused by neighboring teeth. When the teeth next to the canines are crooked, the canines can appear more prominent. Alternatively, other teeth around the canines may be abnormally small. Braces or clear aligners can correct crooked incisors, and applying porcelain veneers to smaller teeth could help normalize their length.

Apply dental crowns. In some instances, we can reduce the canines in size and then bond porcelain crowns to them. This is the option that Dion ultimately chose. The natural teeth are still intact, but the crowning process transforms them into properly proportioned, life-like teeth. There is, however, one caveat: The alteration to these teeth will be permanent, so they will need a crown from then on.

Besides crowning her canine teeth, Dion also underwent other dental work to straighten and whiten her other teeth. As a result, this superstar performer now has a superstar smile to match and so can you if your teeth are less than perfect. These or other cosmetic enhancements can give you the look you truly desire. All it takes is an initial visit with us to start you on the road to a transformed smile.

If you would like more information about various cosmetic solutions for your smile, please contact us or schedule a consultation. To learn more, read the Dear Doctor magazine article “Porcelain Dental Crowns.”

By Michael E. Huguet DDS
October 11, 2021
Category: Dental Procedures
Tags: crowns  
WhatYouNeedToKnowToChoosetheRightDentalCrown

In the realm of dental restorations, not all crowns are alike. And, one type isn't necessarily superior to the others. One type of crown may work better for a particular tooth, while a different crown is better suited to another.

Therefore, knowing your options can help you make a more informed choice with your dentist regarding the best crown for your needs. Here, then, is a quick primer on the main types of dental crowns used today.

Metal crowns. Early in the last century, crowns made of gold, silver or other metals were the go-to dental restoration. Because of their strength and durability, metal crowns are still used today, mainly in back teeth that encounter heavy biting forces. Their drawback: They're decidedly not the color of natural teeth and so can stand out if they're placed in the visible "smile zone."

PFM crowns. The first crowns made with dental porcelain solved the appearance problem, but couldn't adequately handle biting forces as well as metal. Out of this came the porcelain fused to metal (PFM) crown, which contains an inner core of metal overlaid with tooth-colored porcelain. Providing both strength and life-likeness, PFM crowns were immensely popular until the mid-2000s.

All-Ceramic crowns. The development of porcelains more durable than earlier versions eventually dethroned the PFM (although the latter is still used today). Sixty percent of the crowns installed in recent years are all-ceramic, many reinforced with a strength material known as Lucite. Many all-ceramic crowns reaching the 15-year mark are still in place and functioning.

All of these crowns continue to be viable options for dental patients. The biggest factor in choosing one particular crown over another is the type of tooth involved and its location. As mentioned before, metal or PFM crowns are usually better for back teeth where durability is a higher priority than aesthetics. All-ceramics work well in high-visibility front teeth that normally encounter lighter biting forces than back teeth.

Regardless of which kind eventually caps your tooth, any of today's modern crowns will function as intended. But the best crown for you will be the one that both protects your tooth and enhances your smile.

If you would like more information on dental crown restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Porcelain Dental Crowns.”

By Michael E. Huguet DDS
September 17, 2018
Category: Dental Procedures
Tags: crowns  
NotallDentalCrownsSharetheSameQualityofLife-Likeness

Dental crowns are an essential means for restoring damaged or unattractive teeth. A well-crafted crown not only functions well, it looks and blends seamlessly with the rest of the natural teeth.

Crowns are artificial caps that cover an entire visible tooth, often used for heavily decayed or damaged teeth or as added protection after a root canal treatment. Most crowns are produced by a dental lab, but some dentists are now creating them in-office with computer-based milling equipment. On the whole, the various crowns now available function adequately as teeth—but they can vary in their appearance quality.

In the early to mid 20th Century the all-metal crown was the standard; but while durable, it could be less than eye-pleasing. Although more life-like dental porcelain existed at the time, it tended to be brittle and could easily shatter under chewing stress.

Dentists then developed a crown that combined the strength of metal with the attractiveness of porcelain: the porcelain fused to metal or PFM crown. The PFM crown had a hollow, metal substructure that was cemented over the tooth. To this metal base was fused an outer shell of porcelain that gave the crown an attractive finish.

The PFM reigned as the most widely used crown until the mid 2000s. By then improved forms of porcelain reinforced with stronger materials like Lucite had made possible an all-ceramic crown. They’re now the most common crown used today, beautifully life-like yet durable without the need for a metal base.

All-ceramics may be the most common type of crown installed today, but past favorites’ metal and PFM are still available and sometimes used. So depending on the type and location of the tooth and your own expectations, there’s a right crown for you.

However, not all crowns even among all-ceramic have the same level of aesthetic quality or cost—the more life-like, the more expensive. If you have dental insurance, your plan’s benefits might be based on a utilitarian but less attractive crown. You may have to pay more out of pocket for the crown you and your dentist believe is best for you.

Whatever you choose, though, your modern dental crown will do an admirable, functional job. And it can certainly improve your natural tooth’s appearance.

If you would like more information on dental restorations, please contact us or schedule an appointment for a consultation.

By Michael E. Huguet DDS
November 13, 2016
Category: Dental Procedures
AToothlessTiger

Let’s say you’re traveling to Italy to surprise your girlfriend, who is competing in an alpine ski race… and when you lower the scarf that’s covering your face, you reveal to the assembled paparazzi that one of your front teeth is missing. What will you do about this dental dilemma?

Sound far-fetched? It recently happened to one of the most recognized figures in sports — Tiger Woods. There’s still some uncertainty about exactly how this tooth was taken out: Was it a collision with a cameraman, as Woods’ agent reported… or did Woods already have some problems with the tooth, as others have speculated? We still don’t know for sure, but the big question is: What happens next?

Fortunately, contemporary dentistry offers several good solutions for the problem of missing teeth. Which one is best? It depends on each individual’s particular situation.

Let’s say that the visible part of the tooth (the crown) has been damaged by a dental trauma (such as a collision or a blow to the face), but the tooth still has healthy roots. In this case, it’s often possible to keep the roots and replace the tooth above the gum line with a crown restoration (also called a cap). Crowns are generally made to order in a dental lab, and are placed on a prepared tooth in a procedure that requires two office visits: one to prepare the tooth for restoration and to make a model of the mouth and the second to place the custom-manufactured crown and complete the restoration. However, in some cases, crowns can be made on special machinery right in the dental office, and placed during the same visit.

But what happens if the root isn’t viable — for example, if the tooth is deeply fractured, or completely knocked out and unable to be successfully re-implanted?

In that case, a dental implant is probably the best option for tooth replacement. An implant consists of a screw-like post of titanium metal that is inserted into the jawbone during a minor surgical procedure. Titanium has a unique property: It can fuse with living bone tissue, allowing it to act as a secure anchor for the replacement tooth system. The crown of the implant is similar to the one mentioned above, except that it’s made to attach to the titanium implant instead of the natural tooth.

Dental implants look, function and “feel” just like natural teeth — and with proper care, they can last a lifetime. Although they may be initially expensive, their quality and longevity makes them a good value over the long term. A less-costly alternative is traditional bridgework — but this method requires some dental work on the adjacent, healthy teeth; plus, it isn’t expected to last as long as an implant, and it may make the teeth more prone to problems down the road.

What will the acclaimed golfer do? No doubt Tiger’s dentist will help him make the right tooth-replacement decision.

If you have a gap in your grin — whatever the cause — contact us or schedule an appointment for a consultation, and find out which tooth-replacement system is right for you. You can learn more in the Dear Doctor magazine articles “Dental Implant Surgery” and “Crowns & Bridgework.”

By Michael E. Huguet DDS
August 15, 2016
Category: Dental Procedures
Tags: crowns   celebrity smiles  
DentalCrownsfortheKingofMagic

You might think David Copperfield leads a charmed life:  He can escape from ropes, chains, and prison cells, make a Learjet or a railroad car disappear, and even appear to fly above the stage. But the illustrious illusionist will be the first to admit that making all that magic takes a lot of hard work. And he recently told Dear Doctor magazine that his brilliant smile has benefitted from plenty of behind-the-scenes dental work as well.

“When I was a kid, I had every kind of [treatment]. I had braces, I had headgear, I had rubber bands, and a retainer afterward,” Copperfield said. And then, just when his orthodontic treatment was finally complete, disaster struck. “I was at a mall, running down this concrete alleyway, and there was a little ledge… and I went BOOM!”

Copperfield’s two front teeth were badly injured by the impact. “My front teeth became nice little points,” he said. Yet, although they had lost a great deal of their structure, his dentist was able to restore those damaged teeth in a very natural-looking way. What kind of “magic” did the dentist use?

In Copperfield’s case, the teeth were repaired using crown restorations. Crowns (also called caps) are suitable when a tooth has lost part of its visible structure, but still has healthy roots beneath the gum line. To perform a crown restoration, the first step is to make a precise model of your teeth, often called an impression. This allows a replacement for the visible part of the tooth to be fabricated, and ensures it will fit precisely into your smile. In its exact shape and shade, a well-made crown matches your natural teeth so well that it’s virtually impossible to tell them apart. Subsequently, the crown restoration is permanently attached to the damaged tooth.

There’s a blend of technology and art in making high quality crowns — just as there is in some stage-crafted illusions. But the difference is that the replacement tooth is not just an illusion: It looks, functions and “feels” like your natural teeth… and with proper care it can last for many years to come.  Besides crowns, there are several other types of tooth restorations that are suitable in different situations. We can recommend the right kind of “magic” for you.

If you would like more information about crowns, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine articles “Crowns & Bridgework” and “Porcelain Crowns & Veneers.”